Golf Ferrules 20-Piece Set / 2 Lines / 335 350 355 370

Price is for 20 pieces.

Please let us know your desired TIP diameter after purchase.
335 or 350 or 355 or 370
__________________
TIP Diameter / (Outer Diameter x Inner Diameter x Height)
TIP Diameter 335 / 13.5 x 8.6 x 15mm
TIP Diameter 350 Short / 13.4 x 8.9 x 16mm
TIP Diameter 350 Long / 13.4 x 8.9 x 22mm
TIP Diameter 355 / 13.5 x 9.1 x 16mm
TIP Diameter 370 / 13.6 x 9.5 x 19mm
__________________
*Sold in sets of 10 of the same type and size.
*An additional 200 yen will be charged if not of the same type and size.

[Material]
High-quality celluloid

[Tip Diameter]
For steel shafts, carbon shafts, taper or parallel shafts, etc., please refer to the specifications published by the shaft manufacturer when pressing.
___________________

—□■ How to Choose a Ferrule ■□—
① Determine the outer diameter of the ferrule.
Measure the hosel diameter and choose a size that is approximately +0.2mm larger.
→ It will finish beautifully if you shave it to be flush and finish with acetone.
② Determine the inner diameter of the ferrule.
Please refer to the TIP Diameter in the specifications table published by the shaft manufacturer you are using.
→ Generally, a ferrule about 0.1mm larger than the inner diameter is inserted and glued.
③ Determine the design and height of the ferrule.
___________________
*Please choose the appropriate ferrule to ensure a clean connection between the shaft and the head.
*While ferrules are cosmetic parts, if they shift upwards, there is a possibility of the head coming off. Please check.
*If you have difficulty choosing, please consult a workshop or craftsman.
*All work is done at your own risk.

= = = = =
→ We cannot answer questions such as I will use this for XX, is it compatible? Please make your own judgment.
= = = = =

Ferrules Cell Shaft Sleeve
Iron Utility Wedge
Driver Spoon 3W 5W UT

▼▼▽▼▼▽▼▼▽▼▼
Please be sure to check your profile before purchasing.